Starting via radio control
Starting via remote control (1)
- From the control panel, press the button (2 - blue light active) to enable the radio control;
- Activate the radio control using the "On" button (R6) to the right of the red emergency button on the radio control itself;
- The red LED to the right of the emergency button (steady light) indicates that the radio control is powered --> battery charged;
-
The LED to the left of the emergency button, on the other hand:
- If the red light is on, the connection between the radio control and the machine has not been activated;
- If the light is off or the green light is flashing, the connection between the radio control and the machine is established.
Starting via remote control (2)
- The diesel engine can only be started if the mains power supply is not active;
- Move the selector lever (R2) to the left to start the diesel engine;
- The diesel engine can be switched off by radio control using the "stop" button (R5).
Starting via remote control (3)
The electric motor can be started when the mains power supply is active:
- Move the selector lever (R2) to the left to start the electric motor;
- The electric motor can be turned off by radio control using the "stop" button (R5).
Starting via remote control (4)
If necessary, use the remote control via cable instead of via radio:
- Connect the remote control keypad (1) to the remote control unit (2) using the coaxial cable supplied (3)*
*The connection plugs of the two parts are different from each other so as to make an incorrect connection impossible.